PERENCANAAN SAMBUNGAN LAS PADA RANGKA BAJA PIPA JEMBATAN SAWANGAN NIKKO-BALI TIPE PELENGKUNG

  • I Wayan Reditya Candra Wibawa
  • Ratri Andinisari ITN Malang

Abstract

The bridge has a function as a supporting infrastructure to connect between cities and regions, besides that the bridge also functions as an icon of the area or city itself when viewed from an architectural perspective. A bridge with an arch type steel frame is the topic of selection in an alternative study on the superstructure planning of the Sawangan Nikko-Bali Bridge, because this type of bridge has a span length of 100 meters with a vehicle floor width of 9.65 meters using PCI Girder concrete construction with 2 concrete pillars in the middle. Based on this, the alternative planning study will choose a steel pipe frame arch type bridge with a height of 20 meters, a bridge width of 9 meters, and a bridge length of 120 meters. Planning using the DFBT (Load Factor and Endurance Design) method, 3D structural analysis modeling the superstructure of the bridge using SAP 2000 v21 software, and the latest SNI as a reference for bridge structure planning. The results of the planning that has been done, used WF profiles 350 × 175 × 7 × 11 for elongated girders, WF profiles 800 × 300 × 14 × 26 for transverse girders, Box profiles 800 x 600 x 30 x 30 for edge elongated main girders, profiles Pipe 610 x 548 x 30.9 for lower and upper arch main girder, Pipe profile 406 x 364 x 21 for vertical and diagonal main girder, Pipe profile 356 x 318 x 19 for upper transverse girder, Pipe profile 273 x 238 x 17, 49 For wind ties over the cable, the hanger uses a D60 mm Tension Rod. The dimensions for elastomeric bearings on the edge of the main girder are 400 × 400 × 120 and 500 × 500 × 155 for the arch main girder.

 

Downloads

Download data is not yet available.
Published
2026-11-02