ANALISIS NUMERIK DISTRIBUSI GAYA, TEGANGAN, DAN REGANGAN KABEL PADA JEMBATAN CABLE STAYED DENGAN BEBAN LAYAN

  • Mariano bintang fabio
  • Ratri Andinisari ITN Malang

Abstract

Cable-stayed bridges are one of the most widely used bridge types for medium- to long-span applications due to their structural efficiency, high stiffness, and aesthetic appearance. In this structural system, stay cables act as the primary load-carrying elements that transfer loads from the girder to the pylon, making the distribution of cable forces a critical factor affecting the overall structural behavior. This study aims to analyze the distribution of cable force, stress, and strain in an H-pylon cable-stayed bridge under Service I and Strength I load combinations using MIDAS Civil software.

The bridge model analyzed has a total span of 240 m, consisting of a single H-shaped pylon with a semi-fan cable arrangement. The initial cable pretension was determined through an iterative process under the Service I load combination until structural equilibrium was achieved. Subsequently, the cable responses under Service I and Strength I load combinations were evaluated. The results indicate that the cable force distribution under the Strength I load combination is greater than that under Service I, while maintaining a similar distribution pattern among all stay cables. The increase in cable force leads to corresponding increases in cable stress and strain, consistent with the principles of mechanics of materials. Furthermore, all calculated cable stresses remain below the allowable stress limit of 1116 MPa, and the corresponding strains remain within the elastic range. Therefore, the cable system satisfies the strength and safety requirements based on the Load and Resistance Factor Design (LRFD) method.

 

Downloads

Download data is not yet available.
Published
2026-11-03