STUDI NUMERIKAL DISTRIBUSI TEGANGAN DAN REGANGAN TULANGAN LONGITUDINAL PADA BALOK BETON BERTULANG

  • Elias Piterson Poma Rasi
  • Ratri Andinisari ITN Malang

Abstrak

The stress and strain distribution in longitudinal reinforcement is a critical parameter for evaluating the structural behavior of reinforced concrete beams subjected to flexural loading. Understanding the evolution of reinforcement stress and strain provides insight into the load transfer mechanism between concrete and reinforcing steel from the elastic stage to yielding and plastic deformation. This study aims to investigate the stress and strain distribution of longitudinal reinforcement in reinforced concrete beams using the Finite Element Method (FEM) implemented in ABAQUS 2024. A three-dimensional beam model with dimensions of 200 × 300 × 3000 mm was developed using concrete with a compressive strength of 25 MPa, D16 longitudinal reinforcement with a yield strength of 420 MPa, and Ø10 stirrups with a yield strength of 280 MPa. Concrete was modeled using the Concrete Damaged Plasticity (CDP) model with the compressive stress–strain relationship based on the Saenz (1964) constitutive model, while the reinforcing steel was modeled as an elastic–plastic material. The analysis was conducted under displacement-controlled loading of 6.405 mm, 50 mm, and 100 mm. The numerical results show that increasing displacement leads to a progressive increase in stress and strain in the longitudinal reinforcement, indicating the transition from the elastic stage to yielding and plastic behavior. The maximum reinforcement stress reached 421.74 MPa, while the maximum strain reached 0.056. The concrete compressive stress increased to 39.20 MPa, indicating nonlinear material behavior beyond the design compressive strength. The numerical model was validated against manual calculations, yielding an agreement of approximately 97.96%, demonstrating the reliability of the proposed finite element model. These results confirm that ABAQUS is capable of accurately predicting the stress and strain distribution of reinforcing steel and can be effectively applied to evaluate the mechanical behavior of reinforced concrete beams.

##plugins.generic.usageStats.downloads##

##plugins.generic.usageStats.noStats##
Diterbitkan
2026-11-03
Bagian
Articles